Trident Deluxe Contoured Delrin Weight Belt Buckle

The Trident Deluxe Contoured Delrin Weight Belt Buckle is for use with 2 inch (50 mm) webbing. The three slot design means you can properly secure your weight belt or BCD waist belt in place, yet still be able to safely release it in an emergency.

Buckle is made of non-corrosive impact resistant delrin nylon plastic buckle, and is a latch-style belt buckle. Threads easily to standard 2" (50 mm) nylon webbing or rubber weight belt. Weight belt buckle is black in colour.

Trident Deluxe Contoured Delrin Weight Belt Buckle Features

• Non Corrosive Delrin Nylon Plastic
• Impact Resistant Material
• Threads on Standard Nylon or Rubber 2" (5 cm) Webbing
• Works with Rubber Belts
• Latch-Style Belt Buckle
• Great Save-A-Dive Kit Item

Technical Tip

Threading a 3-Slot Quick-Release Belt Buckle

Starting from the front of the metal buckle, thread the left waist strap through the larger end slot of the buckle. Position the buckle approximately 45 cm (18 inches) of webbing length from the plate left waist slot. Then thread the webbing from the back through the centre slot and through the front of the inner most slot. Then thread the webbing through the back of the larger end slot so there are two thicknesses of webbing through one slot and pull the weave tight.

See also, How to Thread a Weight Belt Buckle.

(01/19 LRB)