Sonar Inflator Hose Air Blower Gun - Apeks/SeaQuest

The Sonar Apeks/SeaQuest Inflator Hose Air Blower Gun has a rubber air nozzle on one end and an Apeks/SeaQuest BC inflator male quick-release post on the other end. Normally closed, you depress the side of the rubber air nozzle to release and regulate airflow. With this, you can inflate buoys, beach toys, balloons, etc. from a scuba cylinder tank using a first stage regulator and BC inflator hose. Also works well as an air gun to use compressed air to blow dry equipment.

If you own your own dive gear and cylinders this is a great item to add to your gear bag. The Sonar Apeks/SeaQuest Inflator Hose Air Blower Gun attaches to your Apeks/SeaQuest, BCD Low-Pressure Inflator Hose allowing you to blow dry your regulator cylinder and other items before you stow them for the next dive, or better yet before you put all that wet sandy gear in the trunk of your car for the ride home. Make clean up easier with this handy Sonar Apeks/SeaQuest Inflator Hose Air Blower Gun.

The Sonar Apeks/SeaQuest Inflator Hose Air Blower Gun can also be really handy in the garage or home for clearing dust, sawdust, equipment, tools etc. Easy to use just attach it to your Regulator LP Inflator Hose and turn on your cylinder air. To activate air just bend the rubber tip and a stream of over 100 psi of air will clean up or dry off anything quickly and efficiently.

This male end of this adaptor connects to the female quick disconnect outlet on an Apeks Octo Plus, SeaQuest AirSource (including 1, 2 and AirSource3 QD), Zeagle Octo-Plus, Aqualung Air Mic, Mares Air Control, Beuchat Venturi, US Divers Air Mic, Oceanic Air XS, Aeris AirLink, Aquatec Air-3 and compatible low-pressure BCD/jacket/inflator hose. Male outside diameter 9 mm.

Sonar Inflator Hose Air Blower Gun for Apeks/SeaQuest Features

• Great for dive gear preventative maintenance
• Handy around the garage and home
• Easy to use bend activated
• Attaches to Apeks/SeaQuest inflator hose
• Great item to have in your gear bag
• Chromed brass and rubber construction
• Low pressure only - below 200 psi

Stock Status: Discontinued Stock. Once sold out, that's it! Sadly, there are no returns, refunds, or exchanges on discontinued stock.